Please refer to the main Schedule of Products page for more information.

Fittings – Metallic

Product type

Product scope/application

Specification

Year

Lead Free Applies

Copper alloy fittings

Metallic body pipe fittings and connectors for use with copper tube, stainless steel pipe, stainless steel tube and adaptor fittings for connection to other pipe materials in water supply systems.

Note: Product testing specific to gas products are not required.

AS 3688 Water supply and gas systems - Metallic fittings and end connectors

Note: See NoD 2017/4.3

2016

Yes

Cast, hot-pressed, shell-moulded, and tubular fittings with socket/spigot capillary connection ends for use in non-pressure sanitary plumbing applications with the nominal sizes from DN 32 to 225.

AS 3517 Capillary fittings of copper and copper alloy - Non-pressure sanitary plumbing applications

2007

No

Copper alloy waste fittings including traps, gullies, waste outlets, gratings and connectors.

AS 1589 Copper and copper alloy waste fittings

2001

No

Copper fittings

Copper waste fittings including traps, gullies, waste outlets, gratings and connectors.

AS 1589 Copper and copper alloy waste fittings

2001

No

Metallic body fittings and connectors for use with copper tube, stainless steel pipe, stainless steel tube and adaptor fittings for connection to other pipe materials in water supply.

Note: Product testing specific to gas products are not required.

AS 3688 Water supply and gas systems -  Metallic fittings and end connectors

Note: See NoD 2017/4.3

2016

No

Cast, hot-pressed, shell-moulded, and tubular fittings with socket / spigot capillary connection ends for use in non-pressure sanitary plumbing applications with the nominal sizes from DN 32 to 225.

AS 3517 Capillary fittings of copper and copper alloy - Non-pressure sanitary plumbing applications

2007

No

Copper and copper alloy gullies and expansion joints

Copper and copper alloy waste fittings for use in sanitary plumbing installations including traps, gullies, waste outlets, gratings, and connectors.

AS 1589 Copper and copper alloy waste fittings

2001

No

Ductile Iron fittings

Fittings intended primarily for use with water supply pressure pipes.

AS/NZS 2280 Ductile iron pipes and fittings

2020

No

Stainless steel fittings

Stainless steel fittings for applications in the operating temperature range from - 40°C to 100°C.

AS 3495 Authorization requirements for plumbing products - Stainless steel non-pressure pipes and fittings

 

1997

No

Metallic body pipe fittings and connectors for use with stainless steel pipe, stainless steel tube and adaptor fittings for connection to other pipe materials in water supply systems where the maximum operating pressure does not exceed 2,100 kPa.

AS 3688 Water supply—Metallic fittings and end connectors

Note: See NoD 2017/4.3

2016

No

Stainless steel/nano-antibiotic PP-R pipe fittings

Composite piping system consisting of a stainless steel outer casing bonded to an inner layer of polypropylene (PP-R), which includes a contact layer of nano-antibiotic material intended for use in cold and heated water supply systems at continuous operating temperatures up to 80°C with short exposures up to 100°C and continuous working pressures not exceeding 1.4 MPa.

WMTS-473 Stainless steel/nano-antibiotic PP-R pipe systems for water supply applications

2016

No

Cast Iron fittings

Cast grey iron (flake graphite) non-pressure fittings up to nominal size DN 300 and intended to be used where the internal working pressure is negligible

AS 1631 Cast grey and ductile iron non-pressure pipes and fittings

1994

No

Cast iron pipeline components (including gullies) used for the construction of discharge systems for buildings and of drains, normally as gravity systems of nominal sizes of DN 40 to 600 (inclusive).

EN 877 Cast iron pipes and fittings

1999

No

Grey cast iron fittings

Cast grey iron (flake graphite) non-pressure fittings (including gullies) up to nominal size DN 300 and intended to be used where the internal working pressure is negligible.

AS 1631 Cast grey and ductile iron non-pressure pipes and fittings

1994

No

Aluminium alloy fittings

Aluminium alloy fittings for the conveyance of water for above-ground applications for use at continuous operating temperatures up to 70°C and allowable operating pressures of 1920 kPa in sizes ranging from DN 15 to 150, with an internal plastics lining for use with—

  1. aluminium alloy fittings with an internal plastics lining and mechanical compression joint system in sizes ranging from DN 15 to 50; and
  2. roll-grooved system utilizing polymeric-coated ductile iron couplings and associated fittings with rigid elastomeric sealed joints in sizes ranging from DN 50 to 150.

WMTS-491 Aluminium alloy piping system with plastics lining for plumbing water services applications

2016

No

Flexible couplings

Metal-banded flexible either with or without metal shear rings to be used in below or above ground low-pressure systems which convey water or waste water designed for jointed items having the same or similar nominal internal diameters.

Note: Spigot and socket joints with elastomeric seals and adaptor flexible couplings designed for jointed items having significantly different diameters are outside of the scope.

AS/NZS 4327 Metal-banded flexible couplings for low-pressure applications

1995

No

Repair clamps

Mechanical clamps including:

  1. Type R clamps primarily for ductile iron, grey cast iron, steel, asbestos cement, copper and reinforced concrete; and
  2. Type F clamps primarily for PVC-O, PVC-M, PVC-U and GRP.

AS 4181 Repair and off-take clamps for water industry purposes.

2013

No

Semi-flexible metallic hose assemblies

Semi-flexible metallic hose assemblies from DN 20 to DN 400 with a working pressure of 1200 to 2500 kPa for use with above ground heated water up to 90°C and cold-water supplies in accessible and not submerged locations.

WMTS-520 Semi-flexible metallic hose assemblies

2016

Yes

Stainless steel flexible assemblies

Flexible assemblies constructed from annularly corrugated stainless steel tube of up to DN 50, for use at continuous operating temperatures up to 80°C and continuous working pressures of at least 1400 kPa intended to be installed above-ground and accessible locations.

WMTS-489 Stainless steel flexible assemblies for pumping applications

2016

Yes

Mechanical tapping bands

Plastics or metal tapping saddles for assembly on polyethylene (PE) pressure pipes.

AS/NZS 4129 Fittings for polyethylene (PE) pipes for pressure applications

2020

Yes

PN 16 mechanical tapping bands for the connection of property service pipes to reticulation water mains including tapping bands, with and without electrical insulation, for mechanical connection to standard water mains. The nominal operating temperature is 0°C to 40°C. The nominal size range of DN 80 to 450 with outlet sizes ranging from DN 15 to 50.

Note: Solvent cemented PVC tapping bands and tapping bands for polyethylene water mains are outside of the scope.

AS 4793 Mechanical tapping bands for

waterworks purposes

2020

Yes