Schedule of Products - Fittings – Plastic

Acrylonitrile butadiene styrene (ABS) fittings

Solid-wall acrylonitrile-butadiene-styrene (ABS) fittings for soil and waste discharge (low and high temperature) inside buildings, designed for jointing by means of elastomeric sealing rings, solvent cementing or integral dual-purpose sockets.

ISO 7682 Plastics piping systems for soil and waste discharge

2003

Cross-linked polyethylene (PE-X) fittings

Fittings for use with crosslinked polyethylene (PE-X) for pressure heated and cold water applications.

AS/NZS 2537.2 Mechanical jointing fittings for use with crosslinked polyethylene (PE-X), Part 2: Plastics piping systems for hot and cold water installations – Crosslinked polyethylene(PE-X) – Fittings

Note: See NoD 2017/4.3

2011

Macro composite fittings

Multilayer piping systems for heated and cold water installations inside buildings.

AS 4176.3 Multilayer piping systems for hot and cold water plumbing applications – Fittings

Note: See NoD 2017/4.3

2010

Polybutylene (PB) fittings

Mechanical jointing fittings suitable for use as fixed joints with polybutylene plumbing pipes.

AS/NZS 2642.3 Polybutylene (PB) plumbing pipe systems Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications.

Note: See NoD 2017/4.3

2008

Polyethylene (PE) fittings

Fittings to be used with polyethylene pipe for the conveyance of water and other fluids.

AS/NZS 4129 Fittings for polyethylene (PE) pipes for pressure applications

2020

Solid-wall polyethylene (PE) fittings for soil and waste discharge (low and high temperature) of DN 32 to 100.

AS/NZS 4401 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE)

Note: See NoD 2017/4.3

2006

Polyethylene (PE) fittings greater than DN 100 for sewerage and drainage applications, intended to be used where the pipeline is operating under gravity flow and the operating pressure is low. Including both plain and structured wall fittings.

AS/NZS 5065 Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications

Note: See NoD 2017/4.3

2005

Polypropylene (PP) fittings

Polypropylene (PP) fittings greater than DN 100 for sewerage and drainage applications, intended to be used where the pipeline is operating under gravity flow and the operating pressure is low. Including both plain and structured wall pipes and fittings.

AS/NZS 5065 Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications

Note: See NoD 2017/4.3

2005

Polypropylene (PP) fittings for soil and waste discharge (low and high temperature). This is applicable to PP fittings, and assemblies fittings, intended to be used for soil and waste discharge pipework for the conveyance of domestic waste waters (low and high temperature) and associated ventilation pipework. Fittings for jointing by means of elastomeric sealing rings or by butt fusion.

AS/NZS 7671 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings

2010

Polypropylene (PP) piping systems intended to be used for heated and cold water installations within buildings.

ISO 15874-3 Plastic piping systems for hot and cold water installations – Polypropylene (PP) – Fittings
Note: See NoD 2017/4.3

2013

Polypropylene (PP) piping systems intended to be used for heated and cold water installations within buildings.

ISO 15874-1 Plastic piping systems for hot and cold water installations – Polypropylene (PP) – General

2013

Polyvinyl chloride (PVC) fittings

PVC-U fittings (including gullies and expansion joints) for sewer, drain, waste and vent applications, intended to be used where the pipeline is operating under gravity flow and the operating pressure is low. Including plain and structured wall fittings.

AS/NZS 1260 PVC-U pipes and fittings for drain, waste and vent applications

2017

PVC fittings for pressure applications where not exposed to direct sunlight.

AS/NZS 1477 PVC pipes and fittings for pressure applications

2017

Metric polybutylene (PB) fittings

Mechanical and fusion jointing fittings suitable for use as fixed joints with polybutylene pipes of the following types:

1. Socket weld fittings.
2. Electrofusion fittings.
3. Mechanical fittings.
4. Fittings with incorporated inserts.

AS 5082.2 Polybutylene (PB) plumbing pipe systems - Metric series - Mechanical and fusion jointing systems

2007

Glass-filament-reinforced

thermosetting plastic (GRP) fittings

Glass-reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin. Used for pressure and non-pressure drainage and sewerage applications.

AS 3571.1 Plastics piping systems - Glass-reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin - Pressure and non-pressure drainage and sewerage

2009

Glass-reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin. For use in pressure and non-pressure water supply applications.

AS 3571.2 Plastics piping systems - Glass-reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin - Pressure and non-pressure water supply

2009

Plastic fittings with noise reduction

Noise reduction fittings made of a compound of polypropylene and inert mineral additives for use at intermittent operating temperatures up to 95°C.

WMTS-508 Plastics piping systems for soil and waste discharge – with noise reduction characteristics

2013

Plastic waste outlets

A plastic waste outlet which may incorporate components made from either plastic or other materials.

AS 2887 Plastic waste fittings

1993

Plastic fixture traps

Moulded or fabricated plastic
waste fittings suitable for receiving intermittent liquid discharges at temperatures not exceeding 95°C.

AS 2887 Plastic waste fittings

1993

Soil waste dump fittings

DN 80 or DN 100 plastics-bodied fitting that is utilised as soil waste dump point for mobile toilet waste disposal.

WMTS-482 Soil waste dump fitting

2016

Plastic bodied flexible couplings

Plastic bodied couplings up to DN 225 with included elastomeric element that provides limited flexibility and are utilised in non-pressure rigid pipeline systems.

WMTS-519 Plastic Bodied Flexible Coupling

2016

Plastic bodied fitting with intermediate flexible joints

Plastics bodied fittings of nominal sizes up to DN 225 with intermediate flexible joints for sewer or drain applications intended to be used where the pipeline is operating under gravity flow and the operating pressure is low.

WMTS-055 Plastic fittings – Connectors with flexible intermediate joints for drainage and sewerage applications

2008

Offset pan connectors

Injected moulded offset pan connectors.
 

WMTS-517 Offset pan connectors

2016

Moulded or fabricated plastic waste fittings used to convey liquids not exceeding 95°C from a fixture to discharge pipework.

AS 2887 Plastic waste fittings

1993

PVC-U fittings for sewer drain, waste and vent application intended to be used where the pipeline is operating under gravity flow and the operating pressure is low.

AS/NZS 1260 PVC-U pipes and fittings for drain, waste and vent applications.

2017

Plastic waste fitting

Moulded or fabricated plastic waste fittings used to convey liquids not exceeding 95°C from a fixture to discharge pipework.

AS 2887 Plastic waste fittings

1993