Schedule of Products - Jointing products

Brazing alloy

Jointing material utilized in the installation of water supply plumbing systems.

WMTS-014 Jointing materials

2016

Solder

Jointing material utilized in the installation of water supply plumbing systems.

WMTS-014 Jointing materials

2016

Elastomeric seals and gaskets

For use in water, sewerage and drainage systems.

AS 1646 Elastomeric seals for waterworks purposes

2007

Unreinforced elastomeric and reinforced and unreinforced compressed non-asbestos fibre flange gaskets and elastomeric O-rings suitable for jointing flanges and other flange standards, for—

1. cold potable water supply (up to 40°C); and
2. drainage and sewerage systems (continuous flow up to 45°C and intermittent flow up  to 95°C).

WSA 109 Flange gaskets and o-rings

2011

Lubricant

Jointing material utilized in the installation of water supply plumbing systems.

WMTS-014 Jointing materials

2016

Priming fluid

Solvent cements and priming fluids used in the jointing of-

1. tapered/interference and parallel/no or low interference fit polyvinyl chloride (PVC-U and PVC-M) pressure and non-pressure piping systems;
2. acrylonitrile butadiene styrene (ABS) pressure and non-pressure piping systems; and
3. ABS and acrylonitrile styrene acrylate (ASA) fittings for non-pressure drainage applications with PVC-U pipes.

AS 3879 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings

2011

Solvent cement for polyvinyl chloride (PVC-U and PVC-M)

Solvent cements and priming fluids used in the jointing of tapered/interference and parallel/no or low interference fit polyvinyl chloride (PVC-U and PVC-M) pressure and non-pressure piping systems.

AS 3879 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings

2011

Solvent cement for acrylonitrile butadiene styrene (ABS) and acrylonitrile styrene acrylate (ASA)

Solvent cements and priming fluids used in the jointing of-

1. acrylonitrile butadiene styrene (ABS) pressure and non-pressure piping systems; and
2. ABS and acrylonitrile styrene acrylate (ASA) fittings for non-pressure drainage applications with PVC-U pipes.

AS 3879 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings

2011

Sealant (general)

Jointing material utilized in the installation of water supply plumbing systems.

WMTS-014 Jointing materials

2016

Thread sealant

Jointing material utilized in the installation of water supply plumbing systems.

WMTS-014 Jointing materials

2016

Roll-grooved fittings

Metallic body pipe fittings and connectors for use with copper tube, stainless steel pipe and tube and adaptor fittings for connection to other pipe materials in water supplies with a maximum operating pressure does not exceed 2,100 kPa.

Note: Product testing specific to gas products are not required.

AS 3688 Water supply and gas systems – metallic fittings and end connectors
Note: See NoD 2017/4.3

2016

Transitional fittings

Plastic-bodied transition couplings intended to join PE, PB, PEX, PP, PVC, ABS, copper, ductile iron, cast iron, lead, stainless steel and galvanized steel pipes for cold water applications (with a maximum operating pressure of 1250 kPa at 20°C) to each other and to themselves (i.e., PE to copper), for pipe/tube sizes up to 110 mm outside diameter.

AS 5200.458 Plumbing and drainage products - Universal plastic-bodied transition couplings

2008