NCC 2022 Volume Three - Plumbing Code of Australia
Search the National Construction Code editions
Filter by state
  • Australian Capital Territory
  • New South Wales
  • Northern Territory
  • Queensland
  • South Australia
  • Tasmania
  • Victoria
  • Western Australia
Filter by zone
  • Climate Zone 1
  • Climate Zone 2
  • Climate Zone 3
  • Climate Zone 4
  • Climate Zone 5
  • Climate Zone 6
  • Climate Zone 7
  • Climate Zone 8
Classification
Building class 1a Building class 1b Building class 2 Building class 3 Building class 4 Building class 5 Building class 6 Building class 7a Building class 7b Building class 8 Building class 9a Building class 9b Building class 9c Building class 10a Building class 10b Building class 10c

Filter

Filter by state
  • Australian Capital Territory
  • New South Wales
  • Northern Territory
  • Queensland
  • South Australia
  • Tasmania
  • Victoria
  • Western Australia
Filter by zone
  • Climate Zone 1
  • Climate Zone 2
  • Climate Zone 3
  • Climate Zone 4
  • Climate Zone 5
  • Climate Zone 6
  • Climate Zone 7
  • Climate Zone 8
Classification
Building class 1a Building class 1b Building class 2 Building class 3 Building class 4 Building class 5 Building class 6 Building class 7a Building class 7b Building class 8 Building class 9a Building class 9b Building class 9c Building class 10a Building class 10b Building class 10c

E3

VIC Part E3 Stormwater - Roof drainage systems

VIC Part E3 Stormwater - Roof drainage systems

Introduction to this Part

This Part sets out the requirements for the design, construction, installation, replacement, repair, alteration and maintenance of any part of a roof drainage system

VIC E3O1 Objective2019: FO1

The Objective of this Part is to—

  1. safeguard people from illness, injury or loss (including loss of amenity) due to the failure of a roof drainage installation; and
  2. ensure that a roof drainage installation is adequate; and
  3. conserve water and energy; and
  4. safeguard the environment; and
  5. safeguard public and private infrastructure; and
  6. ensure that a roof drainage installation is designed and is capable of being maintained so that throughout its serviceable life it will continue to satisfy Objectives (a) to (e).
2019: FO1
Print ClauseSave ClauseCopy ClauseEmail

VIC E3F1 Functional statement2019: FF1.1

Buildings are to be provided with a roof drainage installation constructed to provide protection for people, property and the environment from the adverse effects of stormwater.

2019: FF1.1
Print ClauseSave ClauseCopy ClauseEmail

VIC E3P1 Roof drainage systems2019: FP1.1

A roof drainage system must dispose of stormwater flows from rainfall events having an average recurrence interval appropriate to:

  1. The importance of the building.
  2. The severity of potential damage to property, loss of amenity, illness or injury that would result from the failure of the system.
2019: FP1.1
Print ClauseSave ClauseCopy ClauseEmail

VIC E3P2 Overflow2019: FP1.1

A roof drainage system must provide an overflow device to transfer stormwater flows generated by extreme rainfall events.

2019: FP1.1
Print ClauseSave ClauseCopy ClauseEmail

VIC E3P3 Watertightness2019: FP1.1

All internal roof drainage components must be watertight.

2019: FP1.1
Print ClauseSave ClauseCopy ClauseEmail

VIC E3P4 Design, construction and installation2019: FP1.4

(1) A roof drainage system must ensure the following—

  1. Stormwater is transferred to a point of connection.
  2. Access for maintenance and clearing blockages.

(2) A roof drainage installation must avoid the following—

  1. Loss of amenity due to blockages and uncontrolled discharge.
  2. Foul air and gases accumulating in the roof drainage system.
  3. Loss to buildings and property amenity due to blockages and uncontrolled discharge.
2019: FP1.4
Print ClauseSave ClauseCopy ClauseEmail

VIC E3D1 Application2019: F1D1

Performance Requirements E3P1 to E3P4 are satisfied by complying with E3D2.

2019: F1D1
Print ClauseSave ClauseCopy ClauseEmail

VIC E3D2 General requirements2019: F1D2

The design, construction, installation, replacement, repair, alteration and maintenance of a roof drainage system must be in accordance with AS/NZS 3500.3 and SA HB 39, subject to following:

  1. Insert Clause 4.9.6.3 Fastening in AS/NZS 3500.3 as follows: Dowpipes to be securely fastened to walls and structures so as to withstand movement due to thermal expansion or weight due to a partial or total blockage, and
  2. Where there are any conflicts between AS/NZS 3500.3 and SA HB 39, AS/NZS 3500.3 prevails.
2019: F1D2
Print ClauseSave ClauseCopy ClauseEmail