NCC 2022 Volume One - Building Code of Australia Class 2 to 9 buildings
Search the National Construction Code editions
Classification
Building class 1a Building class 1b Building class 2 Building class 3 Building class 4 Building class 5 Building class 6 Building class 7a Building class 7b Building class 8 Building class 9a Building class 9b Building class 9c Building class 10a Building class 10b Building class 10c

Filter

Classification
Building class 1a Building class 1b Building class 2 Building class 3 Building class 4 Building class 5 Building class 6 Building class 7a Building class 7b Building class 8 Building class 9a Building class 9b Building class 9c Building class 10a Building class 10b Building class 10c

C2

Part C2 Fire resistance and stability

Part C2 Fire resistance and stability

VIC C2D11 Fire hazard properties2019: C1.10

Delete subclause C2D11(3) and insert VIC C2D11(3) as follows:

(3) The requirements of (1) do not apply to a material or assembly if it is—

  1. plaster, cement render, concrete, terrazzo, ceramic tile or the like; or
  2. a fire-protective covering; or
  3. a timber-framed window; or
  4. a solid timber handrail or skirting; or
  5. a timber-faced door; or
  6. an electrical switch, socket-outlet, cover plate or the like; or
  7. a material used for—
    1. a roof insulating material applied in continuous contact with a substrate; or
    2. an adhesive; or
    3. a damp-proof course, flashing, caulking, sealing, ground moisture barrier, or the like; or
  8. a paint, varnish, lacquer or similar finish, other than nitro-cellulose lacquer; or
  9. a clear or translucent roof light of glass fibre-reinforced polyester if—
    1. the roof in which it is installed forms part of a single storey building required to be Type C construction; and
    2. the material is used as part of the roof covering; and
    3. it is not closer than 1.5 m from another roof light of the same type; and
    4. each roof light is not more than 14 m2 in area; and
    5. the area of the roof lights per 70 m2 of roof surface is not more than 14 m2; or
  10. a face plate or neck adaptor of supply and return air outlets of an air handling system; or
  11. a face plate or diffuser plate of light fitting and emergency exit signs and associated electrical wiring and electrical components; or
  12. a joinery unit, cupboard, shelving, or the like; or
  13. an attached non-building fixture and fitting such as—
    1. a curtain, blind, or similar decor, other than a proscenium curtain required by Specification 32; and
    2. a whiteboard, window treatment or the like; or
  14. timber treads, risers, landings and associated supporting framework installed in accordance with D3D30 where the Spread-of-Flame Index and the Smoke-Developed Index of the timber does not exceed 9 and 8 respectively.