NCC 2022 Volume One - Building Code of Australia Class 2 to 9 buildings
Search the National Construction Code editions
Classification
Building class 1a Building class 1b Building class 2 Building class 3 Building class 4 Building class 5 Building class 6 Building class 7a Building class 7b Building class 8 Building class 9a Building class 9b Building class 9c Building class 10a Building class 10b Building class 10c

Filter

Classification
Building class 1a Building class 1b Building class 2 Building class 3 Building class 4 Building class 5 Building class 6 Building class 7a Building class 7b Building class 8 Building class 9a Building class 9b Building class 9c Building class 10a Building class 10b Building class 10c

D4

Part D4 Access for people with a disability

Part D4 Access for people with a disability

TAS D4D1 Deemed-to-Satisfy Provisions2019: D3.0

Delete subclause D4D1(1) and insert TAS D4D1(1) as follows:

(1) Where a Deemed-to-Satisfy Solution is proposed, Performance Requirements D1P1 to D1P6, D1P8, D1P9 and TAS D1P10 are satisfied by complying with—

  1. D2D2 to D2D23, D3D2 to D3D30, D4D2 to D4D13 and TAS D4D14; and
  2. in a building containing an atrium, Part G3; and
  3. additional requirements for Class 9b buildings, Part I1; and
  4. for public transport buildings, Part I2.

TAS D4D1 Deemed-to-Satisfy Provisions2019: D3.0

Delete subclause D4D1(3) and insert TAS D4D1(3) as follows:

(3) This sub-clause has deliberately been left blank.

TAS D4D5 Exemptions2019: TAS D3.4(d)

Delete clause D4D5 and insert TAS D4D5 as follows:

The following areas are not required to be accessible:

  1. An area where access would be inappropriate because of the particular purpose for which the area is used.
  2. An area that would pose a health or safety risk for people with a disability.
  3. Any path of travel providing access only to an area exempted by (a) or (b).
  4. The Class 2 parts of a building where—
    1. the building is an existing building with a rise in storeys of two; and
    2. the storey at ground level is Class 5 or 6; and
    3. the upper storeys is comprised of two or more Class 2 sole-occupancy units that are not made available for short-term rental.

TAS D4D14 Compliance with Premises Standards2019: TAS D3.13

Insert TAS clause D4D14 in clause D4D14 as follows:

(1) A building solution must comply with the Disability (Access to Premises - Buildings) Standards 2010.

(2) A building solution complies with TAS D4D1(1)(a) if it complies with the applications, exemptions and concessions in the Disability (Access to Premises - Buildings) Standards 2010.